OK
12
12

Order Summary

3 Products

 1,234

View Cart
MORE
Store Timings
    PAY ONLINE
    CASH ON DELIVERY
    Note: This product is currently not available.
    The product name
    $ 150,000
    If you wish to buy more than one quantity of this product, please add the desired quantity in the next step.
    PROCEED TO PAYMENT
    After clicking the button, you will be redirected to a separate page.
    YOUR DETAILS
    ORDER DETAILS
    this is the product name that is to be bought
    $ 1200
    QTY
    Note: The delivery usually takes 2-5 days depending on availability and your location.
    manual
    Oh no! Nothing matches ‘’. Try something else?
    Manual Reset Off Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Manual reset OFF valve (latching on de-energization) switches ON when energized. Valve does not switch OFF when de-energized till switched OFF manually. This type of valve is used where the valve is required to remain ON even though supply to the solenoid is switched OFF.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Manual Reset Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Pneumatic Power Cylinder
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Available in Aluminum and SS 304 Body Materials Cylinders with Latch wheel for auto / manual operation Manula override with safety key for excessive load Protective bellow made from Neoprene or artificial leather to protect the rod seal even in dusty environments
    CSM Series
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Openwell Submersible pumpsets are ideally suitable for open wells or tanks where a wide fluctuation of water level occur. This work under water and rest at the bottom of the well. Prime mover is rewindable, water-cooled motor Motor sealing is made by polymers, ‘O’ rings, Oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel. Applications Agriculture Domestic Irrigation Gardens Industrial Rural Water Supply High Operating Efficiency Motor is designed with higher cooling effect ensures the longer life of the motor. Extremely tough and hard wearing lubricated journal bearings are used Dynamically balanced rotating parts ensure minimum vibration and longer life. Specially designed Cast Iron body ensures rigid running of Pumpsets. Designed for wide voltage fluctuations
    CV / CVH Series
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Openwell Submersible pumpsets are ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This work under water and rest at the bottom of the well. Prime mover is rewindable, water-cooled motor. Motor must be filled with clear, cold, drinking water as detailed in our operator’s manual. Three -phase motor requires an adequate motor protection control panel. Applications Agriculture Domestic Irrigation Gardens Industrial Rural Water Supply No suction & priming problem Noiseless operation High Operating efficiency No need of Pump House Can be easily dismantled and repaired Motor designed with higher cooling effect ensures longer life
    MHBS Booster Pumps
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    The Booster system maintains the even water pressure in all the outlets. When the pressure drops to the pre-set level, the pump will start-up and meets the demand, When the pressure attained its maximum pre­-set pressure, the pump will be switched off. the complete system is compactly assembled and well monted on a right base. occupies less space facilitated by the sturdy and compact design Applications Residential building Industries Hotels Hospitals Schools Apartments and Bungalows Control of pumps by means of a pressure switch In-built thermal overload protector Lesser running cost than the conventional systems No manual interference to operate the plumbing system High operating efficiency Factory tested system and supplied as a package
    Fuchs make TITAN Gear SAE 90 & SAE 140 - Automotive Gear Oil
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Suitable for light duty & manual transmission application. Low evaporation property can use for new gearbox.