OK
12
12

Order Summary

3 Products

 1,234

View Cart
MORE
Store Timings
    PAY ONLINE
    CASH ON DELIVERY
    Note: This product is currently not available.
    The product name
    $ 150,000
    If you wish to buy more than one quantity of this product, please add the desired quantity in the next step.
    PROCEED TO PAYMENT
    After clicking the button, you will be redirected to a separate page.
    YOUR DETAILS
    ORDER DETAILS
    this is the product name that is to be bought
    $ 1200
    QTY
    Note: The delivery usually takes 2-5 days depending on availability and your location.
    oil seals
    Oh no! Nothing matches ‘’. Try something else?
    Manual Reset Off Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Manual reset OFF valve (latching on de-energization) switches ON when energized. Valve does not switch OFF when de-energized till switched OFF manually. This type of valve is used where the valve is required to remain ON even though supply to the solenoid is switched OFF.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Low Power Intrinsically Safe Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation. Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves. The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Latched Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    In Fluid Control applications where sudden/ momentary loss of power which can result in safety issues, create a major shut down, affecting up time and in applications where continuous power consumption affects the life of power supply, Latch coil solenoid valves offer the ideal solution.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Valve Automation System
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Rotex is leading manufacturer of Valve automation system with almost all sizes of ball valves, butterfly valves and plug valves for the applications, Valve Automation for Emegency Shutdown / Blow Down applications Valve Automation for ON-OFF Applications Valve Automation for Control ApplicationsValve Automation for BUS Communications Applications Valve Automation for Modulating Applications Valve Automation for customised / Specialised Applications Remote Operated Shut off Valve (ROSoV) Gas Over Oil Actuators for High Pressure Gas Lines There are more than 50000 valve automation systems running in the field. Huge installations are put up in Oil & Gas, Pharma, Power, Cement and other process industries
    Electro Hydraulic Actuator
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Rotex EHF Series Actuators are self contained; electro-hydraulic actuators are particularly well suited for applications requiring critical control and high reliability. The EHF series has a wide range of applications and is resistant to environmental influence, even in marine environments. The electro- hydraulic actuators are recommended within district heating plants, oil and gas depots where Explosion-proof equipment is required and where pressurized air is not available or unsuitable. Within the oil and power industry, safety is of the highest importance. In emergency situations the failsafe function i.e. close or open the valve automatically with the aid of a return spring in the actuator. Advantages: Reduced installation and maintenance costs Most reliable means of positioning a valve in a safe position on loss of power or signal The actuator is constructed for direct mounting on valves according to ISO-standards. Designed for safety critical applications Confirms valve availability and minimises plant shutdown Improved process control and product quality Provides local operator information Complete sealing allows calibration and interrogation of the actuator in all environments Environmental protection maintained for internal components during installation and commissioning Interfaces with a variety of communication networks Suitable for harsh environments including immersion up to 7m
    Redundant Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Redundant function is most popular in ESD (Emergency shut Down) type application. Usually these products are part of the shut down loops and connected to an independent shut down control system which may be Double or Triple redundant.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Manual Reset Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Low Power Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Valve is required to be operated using low solenoid power, e.g. field BUS, battery operated, solar panel operated, directly operated with PLC/ DCS output card Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks.Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    GOV Series Gas Over Oil Actuators
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    We offer Gas Over Oil Actuator “GOV” series GOV can be installed on DRS, DRV, HYV or any other make of actuators.
    Solenoid Valve For Automotive
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    ON OFF Type solenoids with lead wires and connectors. Complete assembly can be provided with Check valves, Special sensors, Filtration Screens , controlled orifice etc. Operating Pressure: up to 20 bar (special cases up to 225 bar)Operated through PWM signal and thus Common Solenoid for 12V DC and 24V DC or Pure DC voltages Leakage rate: less than 1CC/min of air at 20 bar Operating Temp range: -40C to 125 CMedia: Air, Fuel, Coolant, Hydraulic Oil, urea etcCan be Supplied with Cleanliness level of Class A as per ISO 16232 Vibration withstanding up to 20G Able to withstand more than 120 cycles of thermal shocks between -40 C to 125C (temp change within 10 sec)