OK
12
12

Order Summary

3 Products

 1,234

View Cart
MORE
Store Timings
    PAY ONLINE
    CASH ON DELIVERY
    Note: This product is currently not available.
    The product name
    $ 150,000
    If you wish to buy more than one quantity of this product, please add the desired quantity in the next step.
    PROCEED TO PAYMENT
    After clicking the button, you will be redirected to a separate page.
    YOUR DETAILS
    ORDER DETAILS
    this is the product name that is to be bought
    $ 1200
    QTY
    Note: The delivery usually takes 2-5 days depending on availability and your location.
    suitable
    Oh no! Nothing matches ‘’. Try something else?
    Manual Reset Off Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Manual reset OFF valve (latching on de-energization) switches ON when energized. Valve does not switch OFF when de-energized till switched OFF manually. This type of valve is used where the valve is required to remain ON even though supply to the solenoid is switched OFF.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Low Power Intrinsically Safe Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation. Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves. The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Rack Pinion Actuators
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    ROTEX have been designing and manufacturing world-class rotary actuators for well over 25 years. Our rotary actuators have either pneumatic or hydraulic capability. The number of possible applications is virtually limitless. We offer Single Acting and Double acting Actuators. Double Rack and Pinion Actuator Series “ECF”( Hard anodized body ) & SSF Series ( Stainless Steel Actuator ) with SIL3, ATEX & CE approvals.Suitable for maximum working pressure 10 bar, Temperature range NBR -20 °C to +80 °C, PE -40 °C to +110 °C, Life more than 1 million cycles and the additional lubrication is not required, Our Double Acting Actuator models are available from ECF 32 to ECF 350 sizes and produces torque from 5 Nm to 5110 Nm at standard 7 Bar pressure. Our Single Acting Actuator models are available from ECF 32E to ECF 350E sizes and produces torque from 6 MN to 2543 Nm at Standard 7 Bar pressure.
    Latched Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    In Fluid Control applications where sudden/ momentary loss of power which can result in safety issues, create a major shut down, affecting up time and in applications where continuous power consumption affects the life of power supply, Latch coil solenoid valves offer the ideal solution.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Electro Hydraulic Actuator
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Rotex EHF Series Actuators are self contained; electro-hydraulic actuators are particularly well suited for applications requiring critical control and high reliability. The EHF series has a wide range of applications and is resistant to environmental influence, even in marine environments. The electro- hydraulic actuators are recommended within district heating plants, oil and gas depots where Explosion-proof equipment is required and where pressurized air is not available or unsuitable. Within the oil and power industry, safety is of the highest importance. In emergency situations the failsafe function i.e. close or open the valve automatically with the aid of a return spring in the actuator. Advantages: Reduced installation and maintenance costs Most reliable means of positioning a valve in a safe position on loss of power or signal The actuator is constructed for direct mounting on valves according to ISO-standards. Designed for safety critical applications Confirms valve availability and minimises plant shutdown Improved process control and product quality Provides local operator information Complete sealing allows calibration and interrogation of the actuator in all environments Environmental protection maintained for internal components during installation and commissioning Interfaces with a variety of communication networks Suitable for harsh environments including immersion up to 7m
    Redundant Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Redundant function is most popular in ESD (Emergency shut Down) type application. Usually these products are part of the shut down loops and connected to an independent shut down control system which may be Double or Triple redundant.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Manual Reset Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Low Power Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Valve is required to be operated using low solenoid power, e.g. field BUS, battery operated, solar panel operated, directly operated with PLC/ DCS output card Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks.Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Nile Series
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Nile+ 125mm/100mm (5”/4”) Borewell submersible pump is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water.The optimal design of the impeller and diffuser enables the best possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410/431. Applications Agricultural & Irrigation Domestic Water Supply Sprinkler System Pressure Boosting units Sprinkler Irrigation Industrial and Mining T - Bolt design in all Motor ensures rigid construction Specially designed Deep Drawn type pump ensures perfect alignment and thereby increases the life of the pumpset Specially designed Thrust Bearings to withstand high axial thrust loads Designed for Wide Voltage operation Best suitable for 150mm (6”) size borewell High operating efficiency and more durability
    Delma Series
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. 150 mm (6″) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. T-Bolt design in all motors ensures rigid construction. Specially designed high performance thrust bearings (SS with Carbon) are used to withstand axial thrust loads. Applications Agriculture Domestic Irrigation Gardens Civil & Industrial water supply Rural Water Supply Ponds Fire fighting Pressure boosting SS 304 grade stainless steel stage casings and impellers in radial flow SS 410 impeller / Bronze impeller available in mixed flow series 50 & 60 feet head per stage in specific models Dynamically balanced rotating parts ensures minimum vibrations and longer life Designed for wide voltage fluctuations Better efficiency and consistent performance ensures low operation cost