OK
12
12

Order Summary

3 Products

 1,234

View Cart
MORE
Store Timings
    PAY ONLINE
    CASH ON DELIVERY
    Note: This product is currently not available.
    The product name
    $ 150,000
    If you wish to buy more than one quantity of this product, please add the desired quantity in the next step.
    PROCEED TO PAYMENT
    After clicking the button, you will be redirected to a separate page.
    YOUR DETAILS
    ORDER DETAILS
    this is the product name that is to be bought
    $ 1200
    QTY
    Note: The delivery usually takes 2-5 days depending on availability and your location.
    trouble free
    Oh no! Nothing matches ‘’. Try something else?
    Low Power Intrinsically Safe Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation. Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves. The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Manual Reset Solenoid Valve
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Low power Intrinsic Safety Solenoid System works with a High Efficiency pilot operator to ensure maximum flux linkage between core and plunger, thus improving pulling force. The maximum allowable orifice for the pilot valve is smaller than the Non IS Solenoid valve and IS solenoid valves using Booster Circuit. However the flow Orifice and the pressure rating are higher than most other makes in a similar class thus offering a more reliable operation and a longer life. The ROTEX Lower Power Intrinsically safe Solenoid Valve is suitable for 210 um filtered air having a -20°C Dew point. The valve is most suitable to harsh operating conditions and results in a trouble free operation.Power consumption of 0.14 Watt at 12V DC is also the lowest, in a similar class, demonstrating the advanced technology being used by ROTEX in these valves.The valves are directly compatible to remote I/O terminals of various manufacturers like Simens, ABB, Turk, MTL and Stahl etc. for use in field BUS applications involving PROFIBUS DP-IS and PROFIBUS PA networks. Since there is a change in the valve construction, this group of Valves have been classified under a new range with a wide variety of solutions in 2 port, 3 port, and 5 port configuration in both Direct acting and pilot operated versions. Three different Solenoid constructions are available depending on the cabling needs : DIN Plug (Type 65CR), suitable for flexible cable with a PG9 cable entry. With Integral Terminal Box (Type 67 or 68) in epoxy coated Aluminium or (Type 67-CO or 68-CO) SS 316 construction suitable for armoured cable with gland (mainly for applications in Hydro carbon, Oil and Gas and Petrochemical industries, requiring high safety from Explosion Risk). Rotex intrinsically safe Solenoid is certified as per IS/ EN/ IEC 60079-0 and 60079-18 for Ex ia IIC T6 standards ROTEX have approval for ATEX, INDIAN : CCOE, DGMS, INMETRO, GOST ROTEX also offers a complete range of NAMUR solenoid valve with Intrinsic Safety.
    Steelix Series
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Stainless Steel – Steelix Series 100mm (4”) & 150mm (6″) Borewell Submersible pumps are made of corrosion resistance stainless steel with built in check valve. All Vital components of these pump models are made of high quality 304/316 grade stainless steel and the shaft is of SS 304/329/431. The Optimal design of impellers and diffusers enables the best possible hydraulic efficiency. Applications Food Processing Industry Irrigation Fountains Fire fighting De- Salination plants Sprinkler system Pump components are made up of corrosive resistant SS 304/SS 316 Motor portion covered with corrosive resistance stainless steel SS 304/SS 316 shell Best suitable for saline water and industrial applications High Operating efficiency More longevity & hygiene Additional intermediate bearing on higher stage pump to ensure the deflection free rotation of pump.
    3 inch Borewell Submersible Pumpset
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. LENA 80 mm (3”) Borewell Submersible pump is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water. Built-in check valve prevents back flow and reduces the risk of water hammering. C.R.I. products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. Applications Domestic Irrigation Agriculture Farms Industrial Gardens Motor portion covered with corrosive resistance Stainless steel (SS304) shell High operating efficiency Specially designed thrust bearing to withstand high axial thrust load Extremely hardwearing water lubricated bearing Thread type motor construction ensures service feasibility Designed for wide voltage operation
    3.5INch Borewell Submersible Pumpset
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. LENA 80 mm (3”) Borewell Submersible pump is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water. All vital components of these pumps are made up of corrosive resistance thermoplastic & SS 304. The optimal design of impeller and diffuser enables the best possible hydraulic efficiency. C.R.I. products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. Applications Domestic Irrigation Agriculture Farms Industrial Gardens Motor portion covered with corrosive resistance Stainless steel (SS304) shell High operating efficiency Specially designed thrust bearing to withstand high axial thrust load Extremely hardwearing water lubricated bearing Thread type motor construction ensures service feasibility Designed for wide voltage operation
    Mini Pumps
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Selfpriming monoblock pumpsets are power-driven by a totally enclosed fan cooled AC induction two pole motor, suitable for continuous duty. Motor stator is made of low watt loss silicon laminations assembled under pressure and rigidly locked in the frame. The windings are of high - grade enameled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance, noice free operation and low temperature rise thereby increasing the life cycle of the motor. Pumps volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. Non-selfpriming model is with end suction and radial delivery. Applications Domestic Small Garden Pressure Boosting Civil Applications Built-in with imported Thermal Overload Protector Specially designed for wide voltage fluctuations Powder coated multi-color stator body Sturdy and compact Double sealed ball bearing Pumpset available with extension shaft
    VERTICAL MULTISTAGE PUMPS
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Vertical Multistage inline pumps are products of expertise gained from over four decades of experience, endurance and workmanship. Products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble-free service. Applications Water pressure boosting Residential Buildings Apartments Bungalows Cottage & Villas Hospitals Industries Liquid transfer Prinkler irrigation systems Stainless steel impellers, shaft and stage casings (SS / 304/ SS 316) All single phase motors are fitted with thermal motors protector Strengthened cartridge seals Enhanced hydraulic efficiency Good compatibility and environment friendly Low noise level and low vibration level
    Submersible Aerator
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    C.R.I. Submersible Jet aerators are suitable for all kind of liquid waste water, Discharged from industries and farms. The Products of the expertise gained from over five decades of experience, endurance and workmanship. These products are experienced to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. Applications Biological process Industrial ETP aeration process Stabilisation and Equalization Tank Fish Farms
    I Tech Series CRI Industrial Pumps
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    The range is continuously growing with additions to the product portfolio at regular intervals. Industrial Pumps from CRI find applications not only in handling water but different types of fluids in Paper, Process and Pulp industries, Paint, Dyes and Chemical Industries, Mining and Metal Manufacturing Industries, Food & Beverage Industries, Textile industries, Power Industry, Machine Tool Industry apart from General Water supply. All the products can be customized to suit specific application and requirement and is backed by a dedicated State-of-the-Art Greenfield factory. All pumps are tested in a highly sophisticated PLC-SCADA based Test Bed complying with international standards. Applications Hotels, House, Commercial Buildings & Complex Pumping waste water in Industries Tunnels and Mines Pumping sewage water from Stock Farm Manhole sewerage STP and Pumping from Septic tanks High head Wide free passage in single / multi channel impeller Spiral impeller reduce turbulence & ensure lowest damage in pumping Double mechanical seal Ho7RNF cables Alloyed cast iron to increase resistance to wear
    Fuchs make Ecocut 715 - Deep Hole Drill & Neat cut oil
    INR  0
    INR 0 (Save NaN%)
    Not Available | Free Shipping
    Ecocut 715 is the misting deep hole drilling, neat cutting oil, based on high grade solvent raffinate which contains chlorine free combination of EP additives & polar lubricity improvers. The use of a special base oil and carefully selected combination of additives in Ecocut 715 reduces oil mist in comparison to conventional cutting oils.