Ravi Kiran Enterprises

Features

• Coupling made of cast iron GG 25.
• Torsionally flexible, maintenance free, vibration-damping.
• Axial plug-in, fail-safe.
• Finish bore according to ISO fit, feather keyway according to DIN 885 sheet 1 - JS9 and P9.

We are Manufacturer, Supplier, Exporter of Curved Jaw Couplings With Spider (Utex) and our setup is situated in Satara, Maharashtra, India.

Features

• Torsionally flexible, maintenance free.
• All over machining good dynamic properties.
• Compact design

We are Manufacturer, Supplier, Exporter of Utex Bolted Flange Couplings and our setup is situated in Satara, Maharashtra, India.

Features

• For general machinery.
• Radial assembly of driving or driven machine after disassembly of driving flanges.
• Power flow can be disconnected while coupling is installed

We are Manufacturer, Supplier, Exporter of Snap-Wrap Type Couplings (UW) and our setup is situated in Satara, Maharashtra, India.

Features

• The basic "US" coupling with "Snap-Wrap" type Elastomer and removable collar.
• Inspection and replacement of "Snap-Wrap" without disturbing the alignment of hubs possible.( Drive and Driven Unit )
• Inspection / Replacement of Elastomer within 5 minutes with minimal efforts.
• Maintenance of machines splitting at centerline of shaft is possiblewithout disturbing shaft alignments because of "Snap-Wrap" concept.
• Rated torque range: 21Nm - 4308Nm.
• Torsional Stiffness range: 275 - 183633Nm / Radian.
• KW Rating at 100 rpm range: 0.22 - 45 and 3.30 - 675 at 1500 rpm & 6.60 - 346 at 3000 rpm.

Dewatering fluids for rapid water displacement. Forming thin, highly effective oily, waxy corrosion protection films. Also available in VOC-free formulation acc. 31. BImSchV @ 20°C.

We are Manufacturer, Supplier, Exporter of Two Snap-Wrap Couplings With Spacer (UWS) and our setup is situated in Satara, Maharashtra, India.

Features

• Specially designed for machines requiring space for maintenance.
• Only Screw Driver is required to dismantle coupling for Maintenance / Inspection.
• Down Time is very low.
• Having 2 Snap-wrap Elastomers means double flexibility.
• Floating Aluminum spacer.
• Rated torque range: 21Nm - 327Nm.
• Torsional Stiffness range: 275 - 6990Nm / Radian.
• KW Rating at 100 rpm range: 0.2 - 3.4 and 3.3 - 51.5 at 1500 rpm and 6.6 - 102.9 at 3000 rpm

We are Manufacturer, Supplier, Exporter of Pin & Conical Ring Type Couplings (URC) and our setup is situated in Satara, Maharashtra, India.

Features

• High Torque capacity, Compact size, low weight.
• Simple mechanism, easy to inspect and change the Flex Cone Rings without moving either Shaft or Hub of the coupling.
• Negligible running cost.
• Simple design, Assembling and dismantling is very easy.
• Range up to 4308Nm torque ratings
• Maximum Speed rpm range: 880 - 6500.
• KW Rating at 100 rpm range: 0.56 - 467.

We are Manufacturer, Supplier, Exporter of Metal Flex Type Couplings (UMK) and our setup is situated in Satara, Maharashtra, India.

Features

• High power to weight ratio.
• Accommodates parallel, angular, and axial misalignments.
• Visual inspection is possible without dismantling equipments.
• Flexible membranes replaceable.
• High-speed capacity, High precision standard.
• Zero backlash, Inherently balanced.
• Rated torque range: 33Nm - 13367Nm.
• Torsional Stiffness range: 0.036 - 3.613 Nm/Radian (Changeable on request for larger couplings).
• KW Rating at 100 rpm range: 0.35 - 140.

We are Manufacturer, Supplier, Exporter of Full Gear Type Couplings, Gear Type Couplings and our setup is situated in Satara, Maharashtra, India.

Features

• Less Backlash.
• Compact assembly.
• Larger bore capacities.
• High power to weight ratio.
• Accommodates angular, parallel and axial misalignments.
• Generally used up to 120°C can be used for higher temperatures by using proper grade of grease or oil.
• Standard full flexible gear coupling type UFG accommodate angular & parallel misalignments or a combination of both as well as axial misalignment(end float). Ideal for all horizontal, close coupled applications including fans, overhead cranes, conveyors, steel & paper mill equipments. One or both the hubs can be easily reversed for more than normal shaft separation applications.