Ravi Kiran Enterprises

We are Manufacturer, Supplier, Exporter of Tyre ( Tire ) Type Couplings With Taper Bush - Model UTT and our setup is situated in Satara, Maharashtra, India.

Features

• High flexibility & highest misalignment tolerances. (Angular – Max.40).
• Elastomer in shear - In case of failure of Tyre Torque transmission is stopped shears thus protecting the machinery.
• Better protection in impact load & heavy shocks.
• Easy to assemble & disassemble.
• Lubrication free.
• Taper lock gives clamping on shaft total surface.
• Very easy and less down time in maintenance.

A Pin Bush Coupling is a flexible mechanical coupling used to connect two rotating shafts and transmit torque while accommodating slight misalignment and absorbing shock loads. It consists of two flanged hubs connected by pins and rubber or synthetic bushes, which provide flexibility and damping.

We are Manufacturer, Supplier, Exporter of UFC Couplings and our setup is situated in Satara, Maharashtra, India.

Features

• UFC coupling are essentially general purpose couplings with a flexible spider which can accommodate higher degree of misalignment.
• Parallel misalignment upto 1.7 mm.
• Axial misalignment upto 1.7 mm
• The design of the UFC coupling has been optimised so that power capacities are balanced to the appropriate shaft diameters.
• Spider are unaffected by moisture, grease and oils-including non-aromatic and non-ketone solvents & temperatures within the range 40°C to + 100°C.
• Virtually eliminated and lubrication free.

We are Manufacturer, Supplier, Exporter of Pin Bush Type Couplings With Curved Bush (UB) and our setup is situated in Satara, Maharashtra, India.

Features

• Simple mechanism to demand adjustment or maintenance. Inspection and Replacement of Cone Ring is easy and can be quickly fitted without dismantling or moving either of coupled shaft.
• Assembling and dismantling is very easy.
• By removing the pins, prime mover can be run independently.
• After removing the pins, the hub with shaft can be moved upwards Without disturbing the alignment.
• Working Temperature up to 70 Degree Centigrade Range up to 4308 Nm torque ratings.
• Each coupling is capable of withstanding maximum torque of 3 times of nominal torque.

We are Manufacturer, Supplier, Exporter of Pin & Conical Ring Couplings With Taper Bush (URCT) and our setup is situated in Satara, Maharashtra, India.

Features

• High Torque capacity, Compact size, low weight.
• Simple mechanism, easy to inspect and change the Flex Cone Rings without moving either Shaft or Hub of the couplings.
• Simple design, Assembling and dismantling is very easy.
• Negligible running cost.
• Range up to 4308Nm torque ratings.
• Maximum Speed rpm range: 1280 - 4000.
• KW Rating at 100 rpm range: 3.0 - 167.

Features

We are Manufacturer, Supplier, Exporter of Spider Type Flexible Couplings with Flange (USF) and our setup is situated in Satara, Maharashtra, India.

• Specially designed for Engine Applications.
• Easy to assemble and disassemble.
• Elimination of extension shaft reduces cost of equipment.
• Coupling mounted directly on engine flywheel.
• Rated torque range: 141Nm - 324Nm.
• Variety of sizes available.
• KW Rating at 100 rpm range: 1.49 - 3.43.